Jacuzzi 1983-1993 Models Jacuzzi 1994-2002 Models Jacuzzi 2002-Present Models Gatsby Spas Spa Siding Retro Kits
866-401-1091
Text Our Tech: 303-218-9897

WeSpeakJacuzzi1
Search Clear Creek Spas

Mood Light for Your Hot Tub

Mood Light Assembly Complete
57-270-1000 Complete Mood Light Assembly
INCLUDING
Color Lens Shown
57-270-1000 n/a $24.00
Individual Assembly Parts
57-270-1004
"d"
Lens Housing Only
Hole Size: 2 5/8"
Face Diameter: 3 1/4"
48-002
Same As
309002 8018-000
$10.10

"c"
Rubber Gasket
48-001 n/a $2.49
"b"
Nut
48-003
Same As
309003  
$3.03

"a"
Cone Cap
48-444
Same As
6541-553
$3.00

Mood Light Cord Socket and Line Only 48-445
Same As
6541-553 J222-000
$5.69

Light Replacement
Multi-Color-More Info 08-070

10 color combinations. Simply plug into your mood light socket. Only operates on systems with On/Off Mood Light.

$32.12

Single Clear Bulb Replacement 48-246
Same As
  6611    S449-000
$3.68ea

Red  3 1/4" 48-006
Same As
309004
$4.99ea

Blue 3 1/4" 48-004
Same As
309003
$4.99ea

 

More About Multi Color LED 

Most spas until 2003 have a simple on/off mood light. Until now if you want color, you purchased a Red or Blue cover lens shown above. In the early 2000's manufacturers came up with an LED light replacement. For light assemblies that have a simple 12v light bulb, you unplug the bulb and plug the LED in its place.

What do I you get?

This is a 10 function, 27 LED assembly. Translation: you get 10 color settings and it uses 27 LED's to make the color. Like your TV, it uses the primary colors in mixture to make other colors.

How do you change color selection?

The assembly works off a simple on/off selection. So, by turning the light activation on your spa on/off/on/off etc in rapid sequence you get different colors or color rotations. NOTE: This assembly only works well on simple on/off buttons. If you have a spa with the button in tandem to the jet action OR a light button that gives various brightness levels, this assembly will have mixed results.

How Do I install?

Open side panel where the mood light is located. You should have a white cone like this over the light lens assembly. Remove by either snapping off or twisting. This will expose a standard car dome light used in early production cars. Simply pull the bulb out. Plug the new assembly in. Reverse and see your new multi color choices.

 
 
Copyright 2019 Clear Creek Spas
 
All Rights Reserved