Steps to Rebuild Your Control Box

Which system do you have?
Circulation Pump or Jet Heater System?

Tecmark 1040

If You Only Have a Box

Gatsby 24/7 Design

This was Gatsby's most common system.
This Tecmark control uses a separate canister heater and a 24/7 small circ pump.

Let Us Rebuild YOUR Control Box

Rebuilt Tecmark
Let Us Rebuild Your Existing Box

Send us your existing box and we will remove all internal components and replace with same components found on the C5 control. This makes it really easy for you.

Replace the Old with NEW

C5 w/circ pump
Replaced With NEW C5 Control, Digital Topside AND NEW Heater

Replace the complete box, topside, AND heater. 

C5 w/o Heater Using circ pump
Replace With NEW C5 Control  and Digital Topside ONLY. No Heater.

Replace just the box. Comes with cord to attach to existing canister heater. 

Tecmark 1044

If You Have Attached 2" Heater

Gatsby 24/7 Design

This was Gatsby's basic system.
This Tecmark control uses an attached heater and at least one jet pump.

Let Us Rebuild YOUR Control Box

Rebuilt Tecmark
Let Us Rebuild Your Existing Box

Send us your existing box and we will remove all internal components and replace with same components found on the C5 control. This makes it really easy for you.

Replace the Old with NEW

C5 w/bottom heater
Replaced With NEW C5 Control, Digital Topside, and with a NEW Heater

Replace the complete box AND heater. 

© Copyright 2022  Clear Creek Spas - All Rights Reserved