Jacuzzi 1994-2002 Models Jacuzzi 2002-Present Models Gatsby Spas Spa Siding Retro Kits
  303-390-8959   Texting 

We Speak Gatby
Search Clear Creek Spas

Pipe Fittings and Unions


**See Examples on bottom of page. 
      DISCHARGE Manifold Fittings (all barbs ")
79-860 PLUG: Use to Plug Barb Ports on Right. This is a SPECIALIZE fitting 1.49
79-314
2" 4 Port Open
Replaces
6540-314  
11.25
79-315
2" 4 Port Closed
Replaces
6540-315  
9.25
79-788
2" 6 Port Open
Replaces
6540-788  
12.99
79-316
2" 2 Port Closed
Replaces
6540-316  
7.49
78-051
1 " 4 Port Open
Replaces
2540-051  
9.50
2540-091 1 " 8 Port Open
Discontinued
Buy Two 4 Ports above to equal one 8 Port.
 
   
   Magic Mender

PIPE EXTENDER

Goes INSIDE the existing pipe and continues the same size pipe but adds length.

P1-005 " $6.50
P2-005 " $8.95
P3-005 1" $10.85
P5-005 1 " $11.90
P6-005 2" $11.90

Coupling Extender

Goes OVER the existing pipe coupling and creates same size pipe. Can be used to go over most couplings. You might have to file down raised lettering on coupling to make secure glue joint.

Actual Example of Application; Click Here
P5-429 1 " $11.99
P6-429 2" $11.99

Inside Pipe Coupling

Goes INSIDE BOTH existing pipes and creates an inside mending. BOTH pipes must be same size

P5-500  

1 "

 

$5.65
P6-500 2" $5.65

 

MORE HELP:

Example Discharge Assembly Jacuzzi 1994-2001

JWB Spas with 2 Pumps and 2" Piping (you have to install several reducing fittings to match the 1.5" manifold to the 2" piping.)
A Connect 2" pipe to new elbox P6-429
B New elbow inserts into new coupling P6-110 + P6-304
C New 4 Port Coupling 2540-051
C New 8 Port Coupling 2540-091
D New Street Elbow P5-111
F Mating 2" heater coupling to 1 1/2" piping. P5-500 + 19-005

2 Pump Diagram Shown. 1 Pump Spas Has no Upper Discharge.

   
JWB Spas with 2 Pumps and 1 1/2" Piping (Most Common)
B New elbow inserts into new coupling P5-111
C New 4 Port Coupling 2540-051
C New 8 Port Coupling 2540-091
D New Street Elbow P5-111
F Heater Reduce Couplng w/Rdc Fitting P5-304 + 19-005
   

JWB Spas with 1 Pump and 1 1/2" Piping (Most Common)

B Plug P5-112
C 4 Port 2540-051
D New Street Elbow P5-111
F Heater Reduce Couplng w/Rdc Fitting P5-304 + 19-005


Example of typical Gatsby/Imperial/Swiftriver/Blueridge Discharge Manifold
#1 4 Port, 3/4" Barb Fittings, 2" Piping
Port Manifolds are glued together to equal ports needed. Ports not used are plugged.
This example are slip x spigot which means one end is female, the other male.
Gatsby Discharge Manifold
#2 2 Port, 3/4" Barb Fittings, 2" Piping. Closed End
You can either purchase manifold with a closed end or glue plug or cap on end to stop water flow. Closed end are simply easier.
#3  2" Short Pipe to mate manifold to Discharge Ports.
#5  2" PVC piping from pump
#8  2" "T" Fitting
Some configurations use a 1.5" piping. If that is the case you must add a reducing bushing that glues into the "T" and allows a 1.5" pump piping to insert into the manifold.

Example of typical Jacuzzi Hot Tub "J" Series Hot Tub
#2 2" PVC Street Elbow. "Street" means its male+female Jacuzzi Hot Tub Manifold Example
#3 Short 2" PVC pipe
#4 2 Port 2in 3/4" Barb Fitting Discharge with Closed End
Closed end negates need for plug or cap.
#5 6 Port 2in 3/4" Barb Fitting. Slip X Spigot
(means male one end, female opposite)
Allows simple glueing in series to match number ports needed)
#6 4 Port 2in 3/4" Barb Fitting. Slip X Spigot
#7 3/4" Clamps (1" OD)
One or two ports may be plugged.


 
Copyright 2020 Clear Creek Spas
All Rights Reserved