TextUsSm  

WeSpeakJacuzzi1
Search Clear Creek Spas

Replace Your Control System - - Electronic


Series with NEW "U" Heater

Take A Tour of the C-5

For Spas With "U" Heater and Small 24/7 Circ Pump:

Our C5 Control Unit with "U"  Low Flo Heater.

You replace your failed control box, topside, and heater with current generation non-Jacuzzi brand control box, topside, and low flow heater.

This is current technology design. It has a large topside with full functions. It requires a GFCI protected circuit that does not come with the system. This unit also has ability to operate your #1 Jet pump with 1 or 2 speeds, a second pump and a third component like an air blower. Up to THREE components when you are using 230vac incoming power plus your circulation pump.

2018C5Lfront

T7s TopsideT8s Topside

Clear Creek's United Controls C5 Series

What You Will  Have to Do: Remove the existing heater, topside, and control box. The water flows from the filter, through the circ pump, through the heater, and into the spa. These fittings are 3/4" just as you have now.
With New T7s Topside and 1-3 Components
Each kit includes instructions, operation manual, sensors, and electronic touchpad topside.
$599.00+

 

Explain More... What do I do?

You replace your old control system w/heater, topside, temp sensor, and cords. You will have to do the following:

a. Remove existing heater and control box.

b. Keep your existing circulation pump.

c. The C5 uses different style temp sensor. We include a new housing for you to install. Typically most install the new housing close to their access.

d. New cords to replace the direct to board cords.

CAUTION: This unit's "light" output is standard 12vac. This normally operates most LED systems. The "audio" output socket is a hot socket always ON. If your stereo system has no control from the topside but only needs a constant flow of current, you can attached your line to this power source.

 

How About Repair Parts???  We got you covered. See Here

 


Copyright 2021 Clear Creek Spas