Search Clear Creek Spas

Replace Your Control System - - Electronic

Jacuzzi Series with Standard 15" Horizontal Heater

Take A Tour of the C-5

You replace your failed control box, topside, and heater with current generation non-Jacuzzi brand control box, topside, and heater.

This is current technology design. It has a feature filled topside with full functions. It requires a GFCI protected circuit that does not come with the system. This unit also has ability to operate your #1 Jet pump with 1 or 2 speeds, a second pump and third component like an air blower. Up to THREE components when you are using 230vac incoming power.


T7s TopsideT8s Topside

Clear Creek's C5 Series

What You Will  Have to Do: Remove the existing heater, topside, and control box. The heater is 15" in length, the standard in this high flow style. 
With New T7s or T8s and 3 Components
Each kit includes instructions, operation manual, sensors, and electronic touchpad topside.


Explain More... What do I do?

You replace your old control system w/heater, topside, temp sensor, and cords. You will have to do the following:

a. Remove existing heater and control box.

b. Keep your jet pumps.

c. Unit uses different style temp sensor. We include a new housing for you to install. Typically most install the new housing close to their access panel.

d. New cords to replace the direct to board cords.

CAUTION: This unit's "light" output is standard 12vac. This normally operates most LED systems. The "audio" output socket is a hot socket always ON. If your stereo system has no control from the topside but only needs a constant flow of current, you can attached your line to this power source.


How About Repair Parts???  We got you covered. See Here


Copyright 2021 Clear Creek Spas