Jacuzzi 1994-2002 Models Jacuzzi 2002-Present Models Gatsby Spas Spa Siding
  303-390-8959   Texting 

 
Search Clear Creek Spas

These are the individual parts of a JHT Pump June 2009+ "J Series" using pump motor without bracket. Parts on this page do NOT fit pre-2009 wetends. For those go to HERE. The Pre-2009 48 Frame Wetend and the New 2009+ Wetend parts on this page are not interchangeable unless they have the same part number.

 
3 Things To Check to Confirm You Have the 09+ Wetend Not the Earlier Wetend
Small Divet on Casing Reinforced Post on Bottom Bracket Mounting Nut Has Oblong Shape
 

Earlier "48" Frame 2002-2009 See Here

Late production "J-400" Model Series uses a "56 Frame". Click HERE for 56 Frame Wetend.

Difference between a 48 and 56 frame? Easy: measure the distance between 2 mounting bolts that attach the motor to the pump. 48 frame have 3 5/8" between bolts. 56 frame have 4 1/8" between bolts. Your JHT 48 frame motor can use EITHER the old or new style wetend BUT the parts are not commonly interchangeable.

    2.5hp JHT Wetend Individual Parts
JHT Wetend Complete 2.5 PUMP KIT B Style seen below except o-rings. Fits ALL 2.5 48 Frame JPS/JHT jet pumps 2002-Present $126.00

    2.5hp JHT Wetend Individual Parts
Pump Repair Coupling
JPS Pump ONLY
6000-031 7.83
Straight Repair Coupling 2" 6500-232 14.25
45 Repair Coupling 2" 6500-037 12.30
B Style Front Volute w/plugs 6500-546 36.25
B Style Large Square Oring 6500-545 5.78
B Style Impeller 2.5hp 6500-549 26.25
B Style Impeller 1.5hp 6500-551 21.00
B Style Mechanical Seal-Generic 6500-544 19.25
B Style Rear Bracket Housing 6500-540 28.88
6540-030 JPS Stainless Steel Barb Drain Fitting-(Replaces Nylon) 6540-171
Replaces
6540-030		 16.08
O-ring for suction/discharge Union 6560-044 .87
 
JHT Pump Rebuild Directions
 
 
Copyright © 2020  Clear Creek Spa
All Rights Reserved