Jacuzzi 1983-1993 Models Jacuzzi 1994-2002 Models Jacuzzi 2002-Present Models Gatsby Spas Spa Siding Retro Kits
NEW 303-390-8959 Phone Texting 

Search Clear Creek Spas

   How To Modify Grundfos Circ Pump to Fit Laing Applications:

    Compare Out Of Box:

Laing on left has center intake and 9:00 o'clock discharge.

Grundfos is mirror image with 3:00 o'clock discharge.


    OPTION ONE: Turn Grundfos 180 degrees.

Some installations, there is plenty of suction (front of pump) hose but not discharge.

Option one is to turn the new pump around so the discharge fitting is mounted directly to the  existing hose and the extra suction hose is pulled around to feed the front fitting of the new pump.

    Option Two: Turn the pump and keep the motor the same:

    Step One:

Allen wrench remove 4 bolts holding motor

 to pump

    Step Two:

Align Pump with direction needed




The new generation has TWO white wires to connect incoming power to. Your Ground incoming is tighten to the ground lug. Your incoming 2 wire line connect to the 2 white wires. .

Remember, you must have the correct voltage pump to incoming power. If you apply the wrong voltage to the Grundfos it will void the warranty.




Important Reminders:

a. The new Grundfos has several positions the foot bracket can be set and screwed into the pump

b. Sometimes you must add hose to match new configuration. Do NOT bend the hose and allow it to kink. One option if the hose make a sharp turn is buy a 90 Elbow barb fitting found in the sprinkler section of your local hardware store and 2 clamps. Cut the hose where it kinks and insert the 90 elbow and clamps.

c. However you have to adjust the new Grundfos, once done you can how replace with a more economically priced circulation pump.

d. BOTH Laing and Grundfos allow the enduser to turn the pump by removing the screws that hold the pump to the mounting bracket.



Copyright 2021 Clear Creek Spa